Back to Blog
Buying Guides 2026-11-16 The Camera Exchange 0 views

What Size Protection Filter Do You Need? 95mm, 52mm and 46mm

What Size Protection Filter Do You Need? 95mm, 52mm and 46mm

Match a clear protection filter to your lens thread before you buy. Compare 95mm, 52mm and 46mm options, measure your lens correctly, and weigh HGX Prime against Pure Light and Basis.

The filter size must match your lens thread, not your lens hood

A protection filter screws into the front thread of your lens, so the number you need is the thread diameter printed on the lens barrel or inside the front cap. That number is usually preceded by a diameter symbol, for example 52mm. It is not the focal length, the filter holder size, or the outside diameter of the lens.

Buying the wrong size is the most common mistake with clear filters. A 95mm filter will not fit a 52mm lens, and a 46mm filter will not fit a 52mm lens. If you own several lenses, check each one separately before ordering. Step-up rings can adapt a smaller lens thread to a larger filter, but they add a layer and change how the filter sits, so use them only when you have a reason.

How to measure your lens filter thread

  1. Look at the front of the lens: Many lenses print the thread size near the front rim, often as a number followed by mm. If you see a diameter symbol before the number, that is the filter thread.
  2. Check the lens cap: The size printed on the back of the original lens cap usually matches the filter thread. This is a quick cross-check, not a substitute for reading the lens itself.
  3. Measure only if the markings are gone: Use a ruler or caliper across the inside of the front thread. Measure the threaded opening, not the outer barrel. If your measurement falls between two common sizes, the lens markings are more reliable.
  4. Confirm front and back threads: If you plan to stack filters or keep using your lens cap, check whether the filter has the same thread size on both sides. The ProMaster Basis and Pure Light filters listed here use the same size front and back, which helps with stacking and cap fit.

95mm, 52mm and 46mm: what each size tells you about the lens

Filter size is not a quality grade. It reflects the front element and thread of the lens the filter is made for. A 95mm filter belongs on a large-front lens, while 46mm and 52mm filters suit smaller lenses. Choose the size that fits your lens first, then choose the filter line.

  • 95mm: A large thread for lenses with wide front elements. The ProMaster 95mm HGX Prime Protection Filter has a 95mm thread, a 100mm outer diameter, an 8.2mm frame thickness and 2.0mm lens thickness. Those dimensions matter if you use a hood or a filter holder that sits close to the front of the lens.
  • 52mm: A common size for compact and standard lenses. The ProMaster 52mm Basis Protection Filter uses a 52mm thread on both front and back, so it can accept a 52mm lens cap and stack with another 52mm filter.
  • 46mm: A smaller thread often found on pancake or compact lenses. The ProMaster 46mm Pure Light Protection Filter has a 46mm thread front and back, a 48.9mm outer diameter and a frame thickness of 3.4mm without threads or 5.5mm including threads. The thin frame helps on small lenses where a bulky filter would be noticeable.

ProMaster 95mm HGX Prime: the high-transmission option for large lenses

  • ProMaster 95mm Protection Filter – HGX Prime: Light transmission rate: 99.2% (average at 400 – 700 nm); reflection: less than 0.3% (average at 420 – 680 nm). If you are putting a clear filter on an expensive large lens, light loss and reflections are the main optical trade-offs. These figures describe how much visible light the filter passes and how little it reflects in the supplied measurement range.
    ProMaster 95mm Protection Filter – HGX Prime
    ProMaster 95mm Protection Filter – HGX Prime
  • ProMaster 95mm Protection Filter – HGX Prime: Ultra-hardened glass with a Repellemax II anti-static coating and 22 coating layers; made in Japan. The coating is described as resisting dust, dirt, oil, water and fingerprints, which is useful when you clean the filter often. The hardened glass is a durability feature, not a guarantee against impact.
  • ProMaster 95mm Protection Filter – HGX Prime: Thread size 95mm; outer diameter 100mm; frame thickness 8.2mm; lens thickness 2.0mm. Check these dimensions against your lens hood and any filter holder. An 8.2mm frame is thicker than the 46mm Pure Light frame, which can matter on tightly fitting hoods.

ProMaster 46mm Pure Light and 52mm Basis: compact protection with different priorities

  • ProMaster 46mm Protection Filter – Pure Light: Light transmission rate: 98.2% (average at 400 – 700 nm); reflection: less than 0.5% (average at 400 – 700 nm); 12 coating layers; Schott B270 optical glass; made in Japan. The Pure Light line gives you a clear filter for a 46mm lens with published transmission and reflection figures, so you can judge the optical trade-off rather than guess.
    ProMaster 46mm Protection Filter – Pure Light
    ProMaster 46mm Protection Filter – Pure Light
  • ProMaster 46mm Protection Filter – Pure Light: Frame thickness: 3.4 mm (not including threads) / 5.5 mm (including threads); outer diameter 48.9 mm; color neutral; stackable design. A thin frame and color-neutral glass suit small lenses where you want protection without changing the look of the image. Stacking is supported, but every added filter can affect image quality.
  • ProMaster 52mm Protection Filter – Basis: Thread size: 52mm (front and back); frame material: aluminum; polished optical glass; 10 coating layers; made in China. The Basis line is the value option in this comparison. It keeps the same thread on both sides so your 52mm lens cap and same-size filters still fit, while using fewer coating layers than the other two lines.

HGX Prime vs Pure Light vs Basis: choose by lens value and cleaning habits

The three ProMaster lines differ in published light transmission, coating layers and construction. HGX Prime lists 99.2% transmission, 22 coating layers and ultra-hardened glass. Pure Light lists 98.2% transmission, 12 coating layers and Schott B270 optical glass. Basis lists 10 coating layers and polished optical glass without published transmission figures in the supplied record.

Those numbers are not a ranking of image quality by themselves, because the lens and the shooting conditions matter. A practical way to choose is to match the filter line to the lens and to how often you expect to clean the filter. If the lens is expensive and you shoot in dusty or wet conditions, the HGX Prime coating and hardened glass are the more protective option. If you want a thin, color-neutral filter for a small 46mm lens, Pure Light is the natural fit. If you need a low-cost 52mm clear filter and accept fewer coating layers, Basis covers that job.

Do not assume that a higher transmission number means you will see a difference in every photo. The supplied figures describe average transmission and reflection over stated wavelength ranges. They are useful for comparing the lines, not for predicting a specific image.

What the listings do not confirm

The supplied records do not include installation steps, cleaning procedures, weather-sealing claims or compatibility with specific lens models beyond the thread size. They also do not confirm whether the 95mm HGX Prime or the 52mm Basis use the same thread size on the front and back; only the 46mm Pure Light and 52mm Basis records explicitly state front-and-back thread sizes. If you plan to stack filters on the 95mm HGX Prime, verify that detail with the seller before you buy.

None of the records state a warranty period, a case included with every filter, or a recommended replacement interval. Treat the filter as a consumable protective accessory and inspect it for scratches or coating damage before relying on it for an important shoot.

Related Articles

Customer Service
Home
Products
Cart
Profile