The size on the ring must match the thread on the lens
A step-up ring has two thread sizes: the smaller side screws into your lens, and the larger side accepts a filter. If the ring will not start or feels loose, the first thing to check is whether the small side matches your lens's filter thread. That number is usually printed on the front of the lens barrel or inside the front cap, often next to a diameter symbol (Ø).
Do not use the lens hood diameter, the outside diameter of the barrel, or the size of a filter you already own as a substitute. The only number that matters for mounting is the lens's filter thread. If you cannot find it on the barrel or cap, check the lens documentation that came with it. Without that number, any ring purchase is a guess.
How to confirm your lens filter thread before buying
Work through these checks in order. They rely on information printed on your own gear rather than on assumptions about a lens model.
- Look at the front of the lens: Many lenses print the filter thread size around the front rim, often as a number followed by mm or a diameter symbol. Read it in good light and note the exact number.
- Check the front cap: Some lens caps repeat the filter thread size on the inside or edge. If the cap is original to the lens, this is a useful cross-check.
- Compare with your existing filter: If you already own a screw-in filter that fits the lens, its marked size should match the lens thread. If the filter is marked differently, trust the lens marking over the filter.
- Do not measure the outside of the barrel: The outside diameter of the lens barrel is larger than the filter thread. Measuring it with a ruler will give you a number that is too big and a ring that will not fit.
Why a ring that fits one lens may not fit another
Step-up rings are specific to thread sizes, not to lens models. A ring marked 43mm–58mm has a 43mm male thread for the lens and a 58mm female thread for the filter. A ring marked 62mm–72mm is a different pair entirely. If you change lenses, you may need a different ring even if the filter stays the same.
This is also why buying a ring based on the filter you want to use is only half the decision. The filter side determines what screws onto the front of the ring; the lens side determines whether the ring attaches at all. Both numbers have to be correct.
Three ProMaster step-up rings and the sizes they convert
- ProMaster Step Up Ring – 43mm-58mm: ProMaster Step Up Ring – 43mm-58mm: ProMaster Stepping Rings are precision machined to properly convert the thread size of your filter and/or lens. This ring is the 43mm to 58mm step up ring option: it fits a lens with a 43mm filter thread and accepts 58mm filters.

ProMaster Step Up Ring – 43mm-58mm - ProMaster Step-Up Ring 62mm – 72mm: ProMaster Step-Up Ring 62mm – 72mm: The ProMaster 62mm – 72mm Stepping Ring is a perfect complement to the ProMaster filter line; ProMaster Stepping Rings are precision machined to properly convert the thread size of your filter and/or lens. Use this 62mm to 72mm step up ring when your lens thread is 62mm and your filter thread is 72mm.

ProMaster Step-Up Ring 62mm – 72mm - ProMaster Step-Up Ring 77mm – 82mm: ProMaster Step-Up Ring 77mm – 82mm: ProMaster Stepping Rings are precision machined to properly convert the thread size of your filter and/or lens. This 77mm to 82mm step up ring bridges a 77mm lens thread to an 82mm filter thread.
Vignetting: what a step-up ring can and cannot tell you
A step-up ring places a larger filter farther from the front element than a filter that screws directly to the lens. On some wide-angle setups, that extra distance and the ring's front rim can appear in the corners of the frame. The supplied product records do not include vignetting test results or recommended focal length limits for these rings, so there is no verified threshold to quote here.
The practical check is your own camera and lens. Mount the ring and filter, then look through the viewfinder or review a test frame at the focal length and aperture you plan to use. If you see dark corners, the combination is not working for that shot. Do not assume a particular ring is safe or unsafe on a given lens without that check.
Match the ring to the job, not to the filter alone
The three rings above cover different size jumps. Choose by the pair of numbers you confirmed on your lens and filter.
- 43mm lens thread, 58mm filter thread: The ProMaster 43mm–58mm ring is the direct match. If your lens is 43mm and your filter is 58mm, this is the size to buy.
- 62mm lens thread, 72mm filter thread: The ProMaster 62mm–72mm ring is the direct match. A 62mm filter will not fit the front of this ring, and a 72mm filter will not fit a 62mm lens thread without it.
- 77mm lens thread, 82mm filter thread: The ProMaster 77mm–82mm ring is the direct match. Check that your filter is marked 82mm before ordering.
What the supplied records do not confirm
The product records for these ProMaster rings confirm the thread conversion and precision machining. They do not list material, weight, stack height, or whether a lens cap can be used on the ring with a filter attached. They also do not provide installation steps or torque guidance. If any of those details matter for your setup, treat them as unconfirmed rather than assuming a specification.
For mounting, the safe approach is to start the threads by hand and stop if you feel resistance. Cross-threading is a risk whenever metal threads meet at an angle. The records do not include a manufacturer procedure beyond the thread conversion itself, so keep the first attempt gentle and aligned.




