Godox AD200 Charger and Cable: Which Pocket Flash It Fits

By The Camera Exchange | Published: 2026-11-04

Category: 사용 방법 가이드

Learn which Godox pocket flashes work with the AD200 charger and cable, how to charge safely, and what to check before you plug in.

Quick answer

The Godox Charger and Cable for AD200, AD200PRO, AD300PRO Pocket Flash is designed to charge the battery packs used in those three models. Use it only with the matching Godox battery pack for your flash, and check the connector and voltage before charging.

Why the charger is model-specific

Godox pocket flashes use different battery packs across the AD200, AD200PRO, and AD300PRO. The charger and cable are matched to those packs, so a charger that works for one model may not fit another. Always confirm your flash model and battery pack before charging.

If you own multiple Godox flashes, label each charger and cable so you don’t mix them up. Using the wrong charger can damage the battery or create a safety risk.

What to check before you charge

Inspect the cable and connector for damage, confirm the charger’s input voltage matches your local supply, and make sure the battery pack is the correct type for your flash. If any part is damaged, replace it before use.

How to charge your Godox pocket flash

Identify your flash model: Check the model name on the flash body or battery pack. The charger and cable are intended for AD200, AD200PRO, and AD300PRO only. If your flash is a different model, do not use this charger.
Remove the battery pack: Power off the flash and slide out the battery pack according to your flash manual. Never charge the battery while it is still inside the flash.
Connect the cable to the battery pack: Plug the charger cable firmly into the battery pack’s charging port. Do not force the connector. A loose connection can prevent charging or cause overheating.
Plug the charger into a wall outlet: Use a standard outlet that matches the charger’s voltage rating. Avoid daisy-chaining extension cords. Check the charger’s label for input voltage before plugging in.
Monitor the charging process: Charge in a well-ventilated area away from flammable materials. Disconnect once the battery is full or after the maximum charge time stated in your manual. Do not leave the battery charging unattended for long periods.
Store the charger and cable properly: After charging, unplug the charger and coil the cable loosely. Store in a dry place. Avoid tight bends that can damage the cable’s internal wires.

Product facts

Godox Charger and Cable for AD200, AD200PRO, AD300PRO Pocket Flash: Charger and cable designed for AD200, AD200PRO, and AD300PRO pocket flashes. It gives you a dedicated charging solution for these specific models, so you can keep your flash ready without guessing compatibility.
Godox Charger and Cable for AD200, AD200PRO, AD300PRO Pocket Flash